Nokia Phone Codes
Join now to read essay Nokia Phone Codes
Nokia Codes Tips and Tricks
To check the IMEI (International Mobile Equipment Identity) Type-
*#06#
Information you get from the IMEI-
XXXXXX XX XXXXXX X
TAC FAC SNR SP
*
TAC = Type approval code
*
FAC = Final assembly code
*
SNR = Serial number
*
SP = Spare
To check the phones Software revision type-
*#0000#
Information you get from the Software revision-
V 05.31
18-02-99
NSE-3
*
1ST Line = Software revision
*
2ND Line = The date of the software release
*
3RD Line = Phone type
To enter the service menu type-
*#92702689# (*#WAR0ANTY#)
*
Serial number (IMEI)
*
Production date (MM/YY)
*
Purchase date (MM/YY) You can only enter the date once.
*
Date of last repair (0000=No repair)
*
Transfer user data to another Nokia phone via Infra-Red
Clock Stopping
To check weather your SIM Card supports clock stopping type-
*#746025625# (*#SIM0CLOCK#)
Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus cant be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.
1. To activate the “Headset” menu, you need to short-circuit pins “3” and “4”. After a short time the word “Headset” will be shown in the display. Menu 3-6 is now enabled.
2. To activate the “Car” menu, you need to short-circuit pins “4” and “5”. After a short time the word “Car” will be shown in the display. Menu 3-7 is now enabled.
THE REBOOT TRICK
This should work on all software versions of the 6110.
1. Go to the Calendar (Menu-8)
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold “Clear” until the whole text is cleared, then press “Back”.
5. Press “0”. The main screen will now be showing but a space appears on the screen. (you cant see it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
8. Now enter 6 digits and press the call button.
Wait for a few seconds, the screen should start to flash