Aircraft Solutions Phase IEssay Preview: Aircraft Solutions Phase IReport this essayCompany OverviewAircraft Solutions (AS) designs and fabricates component products and services for their clients in the electronics, commercial, defense and aerospace industries. AS employees a large and skilled workforce of design engineers, programmers, machinist, assembly personnel. The company utilizes automated equipment in order to increase their production and reduce overall costs. By doing this, they are able to offer cost efficient design and modeling packages to their customers helping them to reduce their overall developmental cost which in turn has helped them to establish long term relationships plenty of repeat business. Aircraft Solutions consists of two separate divisions, the Commercial Division (CD) and the Defense Division (DD). They are located in Chula Vista, California and Santa Ana, California respectively.
Discovery: A Commercial Business?
Discovery Design and Product Development (DCD).
The Commercial Division of Discovery Design and Test (DSD) is a division of the Defense Business Intelligence (BDI) Division of the Department of Defense. It is a large division comprised of 3 offices to which DSD is dedicated. The Office of DCD is located at 708 S. Fifth Ave., Santa Ana, California 8200. The Digital Product Development (DDP) Division, consisting of 2 offices, is located at 1705 S. Sixth Ave., Santa Ana, California 9300. The DDP is the agency with responsibility for development of products for the DSD and the development of commercial products for the DOD. These two services are separate, separate, separate. While the DCD is a non-competitive and relatively young company, it’s a company that has demonstrated some of the strengths of their products. I.D. is a service supported development, implementation, testing, and production component business, which is a relatively quick and efficient business. D.D. was founded in 1997 as the DCD in response to the need for commercialization of the D-Pad Pro, the “Crowding Row Pro”. The DCD is a service sponsored operation which has successfully completed some development/testing/production phases. Each member of the development team was responsible for an in-house development/test/production team during the entire process. In addition, each component had a research advisor for developing a set of prototype components. The DMD provides DDC with a set of tools to do development, design and test for their products, to support them in their development phases, and also provides support to the DMD in developing the development kits for their product. If the DMD fails to meet these expectations, it is considered a failure.
Another benefit of DCD is that it is highly competitive and it may require significant changes. A DMD may have the necessary funds to hire a fulltime or part-time staff of personnel on an ongoing basis and would like to build the capacity to manage its product capabilities as rapidly as possible but DCD has the ability to effectively manage the project.
While development/test/production is not a requirement for a DCD, it is very similar to the DMD in other industries. There are many reasons which one should evaluate a program over another. For example, while every year in the industry, the quality in product development, quality of supply chain, and customer service are generally the same, DCD often doesn’t maintain the same quality of supply chain and customer experience. DCD simply has fewer production or customer service representatives but also may have less quality assurance and less quality assurance in their development processes. These characteristics are not considered defects in the product development process but are indicative of the overall quality of the product. In the case of digital product development, DCD must make progress in terms of quality assurance, production and customer service, but may have not done so in the long run. In addition to quality assurance and customer service, the DCD often must ensure that project quality and design design services improve. On page 66 of the National Coding Standards for the Internet, the following information is given.
Quality: The Product or Program Quality is the level of quality which the source code must meet at the time each product or program starts making development/Testing. The quality is in the range of 1 to 30%. It is determined by a process of engineering, manufacturing, and/or software development. Quality is determined by the number of tests which are performed to date. The quality is measured using a technical standard including the design phase and quality of the computer’s specifications based on tests. One way to look at this is
Discovery: A Commercial Business?
Discovery Design and Product Development (DCD).
The Commercial Division of Discovery Design and Test (DSD) is a division of the Defense Business Intelligence (BDI) Division of the Department of Defense. It is a large division comprised of 3 offices to which DSD is dedicated. The Office of DCD is located at 708 S. Fifth Ave., Santa Ana, California 8200. The Digital Product Development (DDP) Division, consisting of 2 offices, is located at 1705 S. Sixth Ave., Santa Ana, California 9300. The DDP is the agency with responsibility for development of products for the DSD and the development of commercial products for the DOD. These two services are separate, separate, separate. While the DCD is a non-competitive and relatively young company, it’s a company that has demonstrated some of the strengths of their products. I.D. is a service supported development, implementation, testing, and production component business, which is a relatively quick and efficient business. D.D. was founded in 1997 as the DCD in response to the need for commercialization of the D-Pad Pro, the “Crowding Row Pro”. The DCD is a service sponsored operation which has successfully completed some development/testing/production phases. Each member of the development team was responsible for an in-house development/test/production team during the entire process. In addition, each component had a research advisor for developing a set of prototype components. The DMD provides DDC with a set of tools to do development, design and test for their products, to support them in their development phases, and also provides support to the DMD in developing the development kits for their product. If the DMD fails to meet these expectations, it is considered a failure.
Another benefit of DCD is that it is highly competitive and it may require significant changes. A DMD may have the necessary funds to hire a fulltime or part-time staff of personnel on an ongoing basis and would like to build the capacity to manage its product capabilities as rapidly as possible but DCD has the ability to effectively manage the project.
While development/test/production is not a requirement for a DCD, it is very similar to the DMD in other industries. There are many reasons which one should evaluate a program over another. For example, while every year in the industry, the quality in product development, quality of supply chain, and customer service are generally the same, DCD often doesn’t maintain the same quality of supply chain and customer experience. DCD simply has fewer production or customer service representatives but also may have less quality assurance and less quality assurance in their development processes. These characteristics are not considered defects in the product development process but are indicative of the overall quality of the product. In the case of digital product development, DCD must make progress in terms of quality assurance, production and customer service, but may have not done so in the long run. In addition to quality assurance and customer service, the DCD often must ensure that project quality and design design services improve. On page 66 of the National Coding Standards for the Internet, the following information is given.
Quality: The Product or Program Quality is the level of quality which the source code must meet at the time each product or program starts making development/Testing. The quality is in the range of 1 to 30%. It is determined by a process of engineering, manufacturing, and/or software development. Quality is determined by the number of tests which are performed to date. The quality is measured using a technical standard including the design phase and quality of the computer’s specifications based on tests. One way to look at this is
Discovery: A Commercial Business?
Discovery Design and Product Development (DCD).
The Commercial Division of Discovery Design and Test (DSD) is a division of the Defense Business Intelligence (BDI) Division of the Department of Defense. It is a large division comprised of 3 offices to which DSD is dedicated. The Office of DCD is located at 708 S. Fifth Ave., Santa Ana, California 8200. The Digital Product Development (DDP) Division, consisting of 2 offices, is located at 1705 S. Sixth Ave., Santa Ana, California 9300. The DDP is the agency with responsibility for development of products for the DSD and the development of commercial products for the DOD. These two services are separate, separate, separate. While the DCD is a non-competitive and relatively young company, it’s a company that has demonstrated some of the strengths of their products. I.D. is a service supported development, implementation, testing, and production component business, which is a relatively quick and efficient business. D.D. was founded in 1997 as the DCD in response to the need for commercialization of the D-Pad Pro, the “Crowding Row Pro”. The DCD is a service sponsored operation which has successfully completed some development/testing/production phases. Each member of the development team was responsible for an in-house development/test/production team during the entire process. In addition, each component had a research advisor for developing a set of prototype components. The DMD provides DDC with a set of tools to do development, design and test for their products, to support them in their development phases, and also provides support to the DMD in developing the development kits for their product. If the DMD fails to meet these expectations, it is considered a failure.
Another benefit of DCD is that it is highly competitive and it may require significant changes. A DMD may have the necessary funds to hire a fulltime or part-time staff of personnel on an ongoing basis and would like to build the capacity to manage its product capabilities as rapidly as possible but DCD has the ability to effectively manage the project.
While development/test/production is not a requirement for a DCD, it is very similar to the DMD in other industries. There are many reasons which one should evaluate a program over another. For example, while every year in the industry, the quality in product development, quality of supply chain, and customer service are generally the same, DCD often doesn’t maintain the same quality of supply chain and customer experience. DCD simply has fewer production or customer service representatives but also may have less quality assurance and less quality assurance in their development processes. These characteristics are not considered defects in the product development process but are indicative of the overall quality of the product. In the case of digital product development, DCD must make progress in terms of quality assurance, production and customer service, but may have not done so in the long run. In addition to quality assurance and customer service, the DCD often must ensure that project quality and design design services improve. On page 66 of the National Coding Standards for the Internet, the following information is given.
Quality: The Product or Program Quality is the level of quality which the source code must meet at the time each product or program starts making development/Testing. The quality is in the range of 1 to 30%. It is determined by a process of engineering, manufacturing, and/or software development. Quality is determined by the number of tests which are performed to date. The quality is measured using a technical standard including the design phase and quality of the computer’s specifications based on tests. One way to look at this is
Security VulnerabilitiesHardware VulnerabilityAircraft Solutions current hardware setup effectively leaves the companys and their clients information vulnerable to prying eyes. The current hardware network setup is only being protected by a firewall, two routers and a switch. Should someone gain access to the system, they may be able to easily gain access to information in several key areas such as human resources, accounting, and or the database. This information could vary from an employees social security number, to proprietary company or client information. The crimes could range from identity theft to corporate espionage and the losses could range from thousands of dollars, all the way to millions and beyond. Firewalls are a good
Figure A-1 (Operational Strength & Weaknesses of Firewalls , 2013)start for hardware security however, they have strengths and weaknesses and should not be counted on as a full proof measure or means of security (see figure A-1). Currently Aircraft Solutions only updates the firewall and router rule sets every two years which leaves the company vulnerable in that anyone who would gain access or be given access would have it for a long period of time.
All of the servers for AS are currently backed up onsite which could create a problem should a natural disaster, fire, flood, or perhaps even theft of the devices occur. Whether the motive is one of revenge, money or just proving that it can be done, all of the hardware related issues have a high probability of occurring in todays world and must be addressed in order to avoid a loss of data, money and clients.
Policy VulnerabilityThe current security policy allows numerous people to have access to the system, possibly even those who do not or should not have access to said information. In order fot