Programmable Automation
Essay Preview: Programmable Automation
Report this essay
Programmable automation is a form of automation for producing products in batches. The products are made in batch quantities ranging from several dozen to several thousand units at a time. For each new batch, the production equipment must be reprogrammed and changed over to accommodate the new product style. This reprogramming and changeover take time to accomplish
An automated production line consists of a series of workstations connected by a transfer system to move parts between the stations, as illustrated in Figure 5. This is an example of fixed automation, since these lines are typically set up for long production runs, perhaps making millions of product units and running for several years between changeovers. Each station is designed to perform a specific processing operation, so that the part or product is constructed stepwise as it progresses along the line. A raw work part enters at one end of the line, proceeds through each workstation, and emerges at the other end as a completed product. In the normal operation of the line, there is a work part being processed at each station, so that many parts are being processed simultaneously and a finished part is produced with each cycle of the line. The various operations, part transfers, and other activities taking place on an automated transfer line must all be sequenced and coordinated properly for the line to operate efficiently. Modern automated lines are controlled by programmable logic controllers, which are special computers that facilitate connections with industrial equipment (such as automated production lines) and can perform the kinds of timing and sequencing functions required to operate such equipment.
Automated production lines are utilized in many industries, most notably automotive, where they are used for processes such as machining and press working. Machining is a manufacturing process in which metal is removed by a cutting or shaping tool, so that the remaining work part is the desired shape. Machinery and motor components are usually made by this process. In many cases, multiple operations are required to completely shape the part. If the part is mass-produced, an automated transfer line is often the most economical method of production. The many separate operations are divided among the workstations. Transfer lines date back to about 1924.
Press working operations involve the cutting and forming of parts from sheet metal. Examples of such parts include automobile body panels, outer shells of major appliances (e.g., laundry machines and ranges), and metal furniture (e.g., desks and file cabinets). More than one processing step is often required to complete a complicated part. Several presses are connected together in sequence by handling mechanisms that transfer the partially completed parts from one press to the next, thus creating an automated press working line.
Numerical control.
As discussed above, numerical control is a form of programmable automation in which a machine is controlled by numbers (and other symbols) that have been coded on punched paper tape or an alternative storage medium. The initial application of numerical control was in the machine tool industry, to control the position of a cutting tool relative to the work part being machined. The NC part program represents the set of machining instructions for the particular part. The coded numbers in the program specify x-y-z coordinates in a Cartesian axis system, defining the various positions of the cutting tool in relation to the work part. By sequencing these positions in the program, the machine tool is directed to accomplish the machining of the part. A position feedback control system is used in most NC machines to verify that the coded instructions have been correctly performed.
Today a small computer is used as the controller in an NC machine tool, and the program is actuated from computer memory rather than punched paper tape. However, initial entry of the program into computer memory is often still accomplished using punched tape. Since this form of numerical control is implemented by computer, it is called computer numerical control, or CNC. Another variation in the implementation of numerical control involves sending part programs over telecommunications lines from a central computer to individual machine tools in the factory, thus eliminating the use of the punched tape altogether. This form of numerical control is called direct numerical control, or DNC.
Many applications of numerical control have been developed since its initial use to control machine tools. Other machines using numerical control include component-insertion machines used in electronics assembly, drafting machines that prepare engineering drawings, coordinate measuring machines that perform accurate inspections of parts, and flame cutting machines and similar devices. In these applications, the term numerical control is not always used explicitly, but the operating principle is the same: coded numerical data are employed to control the position of a tool or work head relative to some object.
To illustrate these alternative applications of numerical control, the component-insertion machine will be considered here. Such a machine is used to position electronic components (e.g., semiconductor chip modules) onto a printed circuit board (PCB). It is basically an x-y positioning table that moves the printed circuit board relative to the part-insertion head, which then places the individual component into position on the board. A typical printed circuit board has dozens of individual components that must be placed on its surface; in many cases, the lead wires of the components must be inserted into small holes in the board, requiring great precision by the insertion machine. The program that controls the machine indicates which components are to be placed on the board and their locations. This information is contained in the product-design database and is typically communicated directly from the computer to the insertion machine.
Automated assembly.
Assembly operations have traditionally been performed manually, either at single assembly workstations or on assembly lines with multiple stations. Owing to the high labour content and high cost of manual labor, greater attention has been given in recent years to the use of automation for assembly work. Assembly operations can be automated using production line principles if the quantities are large, the product is small, and the design is simple (e.g., mechanical pencils, pens, and cigarette lighters). For products that do not satisfy these conditions, manual assembly is generally required.
Automated assembly machines have been developed that operate in a manner similar to machining transfer lines, with the difference